EMU - BEMU - DEMU

HOME / PRODUCTS / AUXILIARY POWER CONVERTERS
Low Power APS for 1,8kV Traction DC-Link

2EM MR-80F-10D

Roof Installation

The 2EM MS-170F-20D and 2EM MR-170F-20D auxiliary converters are specifically designed to be connected to the traction high voltage DC-Link.

The APS supplies AC 400V@50Hz 3phases + neutral, galvanically isolated, to the train auxiliary loads delivering a total power of 170kVA, and the DC loads (Essential and non-essential) plus battery charging at 110Vdc, delivering a total power of 20kW. The efficiency of the equipmnet is 92% from 50% of load to 100% of load.

The compact and low weight APSis installed on the roof. The APS is cooled by its integrated blower ventilating the IP20 compartment with magnetics and heatsinks, while all electronics and other components are installed in a clean IP65 section.

The converter is equipped with a 415Vac@50Hz Ac external workshop supply. This module allows to start up the battery charger and the rest of the AC loads without using the HV supply. The converter also integrates a precharge circuit, and an input filter.

  • Technical Data
  • Dimensions

Input Voltage

1800 VDC

Overall Dimensions

1400x800x550mm

Voltage range

±5% of nominal value

Weight

350kg

Output voltage AC 

400Vac@50Hz

Operating Temp. 

‐25ºC to +70ºC

Nominal Power AC

80kVA / 68kW

Protection degree

IP66 (IEC 60529)

Output voltage DC

110Vdc

Noise emission

<73db@1m

Nominal Power DC

10kW

Power Connections

Cables

Overall Efficiency

>92% at rated power and nominal input voltage

Control Connections

Harting connector

Cooling

Forced cooling

Shock & Vibration

IEC 61373 / EN 12663-1

Workshop supply

Optional

Fire resistance

EN 45545-2

Medium Power APS for 1,8kV Traction DC-Link

2EM MS-170F-20D / 2EM MR-170F-20D

Underframe or roof Installation

The 2EM MS-170F-20D and 2EM MR-170F-20D auxiliary converters are specifically designed to be connected to the traction high voltage DC-Link.

The APS supplies AC 400V@50Hz 3phases + neutral, galvanically isolated, to the train auxiliary loads delivering a total power of 170kVA, and the DC loads (Essential and non-essential) plus battery charging at 110Vdc, delivering a total power of 20kW. The efficiency of the equipmnet is 92% from 50% of load to 100% of load.

The APS can be installed underframe or on the roof. The APS is cooled by its integrated blower ventilating the IP20 compartment with magnetics and heatsinks, while all electronics and other components are installed in a clean IP65 section.

The converter is equipped with a 415Vac@50Hz Ac external workshop supply. This module allows to start up the battery charger and the rest of the AC loads without using the HV supply. The converter also integrates a precharge circuit, and an input filter.

  • Technical Data
  • Dimensions

Input Voltage

1800 VDC

Cooling

Forced cooling

Voltage range

±5% of nominal value

Shock & Vibration

IEC 61373 / EN 12663-1

Output voltage AC 

400Vac@50Hz

Operating Temp. 

‐25ºC to +70ºC

Nominal Power AC

170kVA(125kW)

Protection degree

IP66 (IEC 60529)

Transient Power AC

342kVA, (PF<0,5) 2 secs 

Noise emission

<71db@1m

Output voltage DC

110 V

Power Connections

Cables

Nominal Power DC

20kW

Control Connections

Harting connector

Overall Efficiency

>92% from 50% to 100% of load 

Fire resistance

EN 45545-2

Overall Dimensions

Underframe: 2200x1245x710mm

Roof: 2075x1125x600mm

Weight (Kg)

Underframe: 675kg

Roof: 625kg

Workshop supply

Optional

Underframe Installation:

Roof Installation:

Medium Power APS for 3,0kV Traction DC-Link

3EM MS-150F-25D / 3EM MR-150F-25D

Underframe or roof Installation

The 3EM MS-150F-25D and 3EM MR-150F-25D auxiliary converters are specifically designed to be connected to the traction high voltage DC-Link.

The APS supplies AC 400V@50Hz 3phases + neutral, galvanically isolated, to the train auxiliary loads delivering a total power of 150kVA, and the DC loads (Essential and non-essential) plus battery charging at 110Vdc, delivering a total power of 25kW. The efficiency of the equipmnet is 92% from 50% of load to 100% of load.

The APS can be installed underframe or on the roof. The APS is cooled by its integrated blower ventilating the IP20 compartment with magnetics and heatsinks, while all electronics and other components are installed in a clean IP65 section.

The converter is equipped with a 415Vac@50Hz Ac external workshop supply. This module allows to start up the battery charger and the rest of the AC loads without using the HV supply. The converter also integrates a precharge circuit, and an input filter.

  • Technical Data
  • Dimensions

Input Voltage

3000VDC

Cooling

Forced cooling

Voltage range

±5% of nominal value

Shock & Vibration

IEC 61373 / EN 12663-1

Output voltage AC 

400Vac@50Hz

Operating Temp. 

‐25ºC to +70ºC

Nominal Power AC

150kVA(127kW)

Protection degree

IP65 (IEC 60529)

Transient Power AC

300kVA, (PF<0,5) 2 secs 

Noise emission

<70db@1m

Output voltage DC

110 V

Power Connections

Cables

Nominal Power DC

20kW

Control Connections

Harting connector

Overall Efficiency

>93%

Fire resistance

EN 45545-2

Overall Dimensions

Underframe: 2200x1600x600mm

Roof: 2200x1600x520mm

Weight (Kg)

Underframe: 1100kg

Roof: 1050kg

Workshop supply

Optional

Underframe Installation:

Roof Installation:

High Power APS for 3,0kV Traction DC-Link

3EM MS-320F-20D / 3EM MR-320F-20D

Underframe or roof Installation

The 3EM MS-320F-20D and 3EM MR-320F-20D auxiliary converters are specifically designed to be connected to the traction high voltage DC-Link.

The APS supplies AC 400V@50Hz 3phases + neutral, galvanically isolated, to the train auxiliary loads delivering a total power of 320kVA, and the DC loads (Essential and non-essential) plus battery charging at 110Vdc, delivering a total power of 20kW. The efficiency of the equipmnet is 92% from 50% of load to 100% of load.

The APS can be installed underframe or on the roof. The APS is cooled by its integrated blower ventilating the IP20 compartment with magnetics and heatsinks, while all electronics and other components are installed in a clean IP65 section.

The converter is equipped with a 415Vac@50Hz Ac external workshop supply. This module allows to start up the battery charger and the rest of the AC loads without using the HV supply. The converter also integrates a precharge circuit, and an input filter.

   

  • Technical Data
  • Dimensions

Input Voltage

3000VDC

Cooling

Forced cooling

Voltage range

±5% of nominal value

Shock & Vibration

IEC 61373 / EN 12663-1

Output voltage AC 

400Vac@50Hz

Operating Temp. 

‐25ºC to +70ºC

Nominal Power AC

300kVA(255kW)

Protection degree

IP65 (IEC 60529)

Transient Power AC

400kVA, (PF<0,5) 2 secs 

Noise emission

<77db@1m

Output voltage DC

110 V

Power Connections

Cables

Nominal Power DC

30kW

Control Connections

Harting connector

Overall Efficiency

>94%

Fire resistance

EN 45545-2

Overall Dimensions

Underframe: 2200x1600x600mm

Roof: 2200x1600x600mm

Weight (Kg)

Underframe: 1300kg

Roof: 1200kg

Workshop supply

Optional

Underframe Installation:

Roof Installation: